The Ingredients of E-Liquid
Sprayer has the ThermoVape substance made by Thermo-technology in the United States.
ThermoVape spray,
you can install the technology and the heater core, a revolutionary new immediate implementation is supplied by rechargeable battery (of LiFePO4) of two lithium iron phosphate, is a portable sprayer.
Using a small handheld design, ThermoVape sprayer is 5, 6 “(L) × 1” (W) × 1 “to measure the (H), only the size that fits in your pocket.
Weighs only 3.5 ounces, this powerful sprayer will provide hours of quality exhaust without being charged!
ThermoVape spray resistanceSprayer is ThermoVape from nickel-plated aluminum shell and low-grade electrical insulating Delrin Aero offers the maximum durability. Quality of construction, the device can be very difficult.
According to the manufacturer, will survive any hit by a car it will be repeated, even water droplets sprayed concrete!
Spray ThermoVape flexibilityThis spray is a wide range of activities. Sprayer is a reliable rain, cold, and any of the advanced ThermoVape, in the air!
Mechanism of spray ThermoVapeThermoVape sprayer is equipped with a simple operating characteristics: First, remove the other around, and then insert the battery (of LiFePO4) 2 and the body. After screwing in the clockwise movement of the body back to, to crush the plant material of your semi-fine consistency.
Counterclockwise and location, the top cover of the steam in the mixture and then loosen bowl. Once the mixture in place and tighten the top cap of the movement in a clockwise direction.
While the evaporation process can lead to 5-10 seconds, turn on the heat source of the thermo-Vape change of the thumb on the slide.
Without fail by the safety design, to draw the unit in order to maintain a constant level of heat, please do not forget to keep the switch to the position of the ON. This feature will keep the device from activation in a pocket or purse.
On average, the battery, make sure that you maintain a continuously rechargeable battery supports 20 minutes of continuous evaporation. Charge between 8 draws, depending on the preference / use, will be provided by four.
Spray ThermoVape speed up the timeWarm-up time Themovape Vaporizer has average is 5 to 10 seconds just to provide almost instantaneous evaporation, turn on the heat switch.
The temperature controller has been designed so as to reach the standard of 400 degrees from 390 degrees Celsius heat.
In proportion to the control of breathing / lottery can be specified in a range of training at a higher temperature than the heat of high-speed training too late and cold.